Auman environmental protection remind you that there is no good or bad 995 neutral silicone rubber, performance corresponding to the price, suitable. Ok. Secondly, there is stability and sufficient quantity or not, which is a test of manufacturers. If the capacity of 995 neutral silicone glue and the marked capacity to be less (note: is the capacity. This situation of sealant is very serious), this sealant is first eliminated, such a business idea has a problem, the product is not where to go. (Many also have problems, proving that the production process of its products is not strictly controlled).

       If the amount is large, the production stability of 995 neutral silicone adhesive should be considered. There are many kinds of silicone sealant: silicone sealant, polyurethane sealant, polysulfide sealant, acrylic sealant, anaerobic sealant, epoxy sealant, butyl sealant, chloroprene sealant, PVC sealant, and asphalt sealant.

The above information is provided by Auman Environmental protection 995 neutral silicone rubber manufacturers

       Identification of 995 neutral silicone adhesive mainly look at the following properties:

       1. Breaking strength (breaking force/cross-sectional area);

       2. Bonding strength (pulling force/bonding area, except substrate damage);

       3. Elongation at break (length at breaking/original length);

       4, anti-aging ability;

       5, appearance (luminosity, particles, bubbles);

       6. Type preservation (no wire drawing, no sagging facade);

       7. Shelf life;

       8. Curing time.

The above analysis is provided by Auman Environmental protection 995 neutral silicone glue manufacturer! Auman environmental protection remind: all buyers in the purchase, must polish their eyes, so as not to buy inferior products, resulting in their own property losses!