【Product Introduction】

OM insulating glass hot melt butyl rubber is a one-component sealant based on polyisobutylene rubber, which is solvent-free, non-fogging, non-vulcanizing, and has permanent plasticity. It maintains plasticity and sealing performance within a relatively high temperature range, and its surface does not crack or harden. It has excellent adhesion, air tightness and outstanding UV resistance to building materials such as glass, aluminum alloy, galvanized steel and stainless steel. Due to its extremely low water vapor transmission rate, it can form an excellent moisture-resistant system with two layers of sealant and is an ideal sealant for insulating glass.

【Product Introduction】

The surface must be clean, dry, free of dust and grease. Before extrusion, it needs to be heated to 100℃ to 150℃ and coated with a dedicated hot melt butyl extruder.

【Storage and Validity period】

Best storage conditions: Cool, well-ventilated and dry place

Storage period: 24 months

【Precautions】

Before construction, please read the instruction manual, safety data sheet and packaging label carefully to obtain information on safe use and potential health hazards.

执行标准：JC/T 914-2014  Enforce standards: JC/T 914-2014

【Packaging】  

Paper tube packaging: 7.0kg(φ180mm).

【Transportation】

This product is non-hazardous and can be transported by train, car, ship and plane.

【Important Note】

The relevant parameters of this product mentioned above, especially the tips regarding its application, are proposed based on our experiments and experience. Due to the differences in materials used and construction conditions, we recommend that you complete the necessary tests before use to ensure that our products can be better applied.