How to use silicone glass glue correctly?? A lot of laymen, get the hand, but have no way to start! Don't worry! **, Auman environmental protection manufacturers for you to specifically introduce the process! Suggest a collection!

1. Use:

Before gluing, it is recommended that the single component silicone glass glue be glued to both sides of the gluing place with paper tape, put the glass glue into the glue gun, and play out from the glue bottle at a uniform speed, and the surface can be trimmed with a spatula or wood chips. Then tear off the paper tape until the adhesive is completely cured. After using soft silicone glass glue, be sure to remove the glue from the glue gun to prevent curing in the glue gun.

2, table dry time:

The curing of silicone glass glue is from outside to inside. Generally, the surface fixed time of acid and neutral transparent silicone glass glue is 5 to 10 minutes, and other colored silicone glass glue is cured within 20 minutes (if the surface needs to be trimmed, it must be cured before the surface).

3. Complete curing:

The curing time of glass glue increases with the increase of bonding thickness. For example, acid glass glue with 12mm thickness may take 3-4 days to solidify, but within about 24 hours, the outer layer of 3mm has been solidified. If the place where the glass glue is used is partially or completely closed, then the curing time is determined by the tightness of the sealing. In... Closed places, it is possible to maintain forever not curing. Increasing the temperature will soften the glass glue. The gap between metal and metal bonding surface should not exceed 25mm. In a variety of bonding occasions, including closed situations, the bonding effect should be checked before the use of the bonded equipment. Acid glass glue in the curing process, due to the evaporation of acetic acid will produce a flavor, this flavor will disappear in the curing process, curing will not have any odor.

4. Bonding:

A. The metal and plastic surface is completely wiped clean, remove the oil, and then in addition to the plastic first rinsed all the surface with acetone, the rubber surface should be polished with sandpaper, and then wiped with acetone.

B. The glass glue is evenly coated on the surface of the ready object. If the two surfaces are glued together, one side can be positioned well, and then the other side can be squeezed with enough force to squeeze out air, but be careful not to squeeze out the glass glue.

C. Place the bonding device at room temperature and wait for the glass adhesive to cure.

5. Cleaning:

Before curing, the glass glue can be wiped off with strips of cloth or paper towels. After curing, it must be scraped off with a scraper or scrubbed with xylene, acetone and other soluble agents.

Xiangyang Aoman Environmental protection Materials Co., Ltd. is a high-tech enterprise engaged in: building sealant, door and window sealant,995 structural glue,995 neutral silicone glue, weatherproof glue, glass glue R & D, production and sales as one. Finished products through the ISO9001 quality system, a number of excellent inspection procedures, in the peer has an advantage. Welcome telephone consultation