How to use glass glue, both beautiful and practical? Below, check out some of the steps shared here!

Operation steps:

1. First you need to be able to use a glue gun.

2, determine the width of your glue, that is, the width of the gap.

3. According to the width of your glue gap, cut the glue nozzle into a diameter slightly smaller than the gap.

4, do a good job on both sides of the rubber gap protection work, in the gap on both sides of the glass, profiles, stone and so on with 2-3CM adhesive paper, on both sides of the glass, profiles, stone and so on play a protective role, but also to correct the gap inside the glue has a great convenience.

5. Master the speed of glue making and the speed of glue gun moving, and evenly move the glue gun according to the depth of the gap.

6, glue area dressing, find a shovel knife to scrape the uneven place, glue when not into the gap.

7. After 48 hours, the adhesive paper on both sides of the material can be removed to complete the construction.

Along a line to play down beautiful, and can not stop, force to be uniform, to play in place.

The above content is for reference only. More content sharing on the Xiangyang Auman Environmental Materials Co., LTD website, welcome to inquire!